The Trac Configuration File
Trac configuration is done by editing the trac.ini config file, located in <projectenv>/conf/trac.ini.
Global Configuration
Since version 0.9, Trac can also read the configuration from a global trac.ini file. These global options will then be merged with the environment-specific options, where local options override global options.
The global configuration is by default localted in $prefix/share/trac/conf/trac.ini. It can be moved to a different location (for example, /etc/trac.ini), but that requires changing the file trac/siteconfig.py which gets created when Trac is installed.
Reference
This is a brief reference of available configuration options.
[account-manager]
| account_changes_notify_addresses | List of email addresses that get notified of user changes, ie,
new user, password change and delete user. |
| authentication_url | |
| force_passwd_change | Forge the user to change password when it's reset. |
| generated_password_length | Length of the randomly-generated passwords created when resetting the password for an account. |
| hash_method | |
| htdigest_realm | |
| notify_actions | Comma separated list of actions to notify of.
Available actions 'new', 'change', 'delete'. |
| password_file | Path to the users file. Leave blank to locate the users file by reading svnserve.conf |
| password_format | |
| password_store | |
[attachment]
| max_size | Maximum allowed file size (in bytes) for ticket and wiki
attachments. |
| render_unsafe_content | Whether attachments should be rendered in the browser, or
only made downloadable.
Pretty much any file may be interpreted as HTML by the browser,
which allows a malicious user to attach a file containing cross-site
scripting attacks.
For public sites where anonymous users can create attachments it is
recommended to leave this option disabled (which is the default). |
[browser]
| color_scale | Enable colorization of the age column.
This uses the same color scale as the source code annotation:
blue is older, red is newer.
(since 0.11) |
| downloadable_paths | List of repository paths that can be downloaded.
Leave the option empty if you want to disable all downloads, otherwise
set it to a comma-separated list of authorized paths (those paths are
glob patterns, i.e. "*" can be used as a wild card)
(since 0.10) |
| hide_properties | Comma-separated list of version control properties to hide from
the repository browser.
(since 0.9) |
| intermediate_color | (r,g,b) color triple to use for the color corresponding
to the intermediate color, if two linear interpolations are used
for the color scale (see intermediate_point).
If not set, the intermediate color between oldest_color and
newest_color will be used.
(since 0.11) |
| intermediate_point | If set to a value between 0 and 1 (exclusive), this will be the
point chosen to set the intermediate_color for interpolating
the color value.
(since 0.11) |
| newest_color | (r,g,b) color triple to use for the color corresponding
to the newest color, for the color scale used in blame or
the browser age column if color_scale is enabled.
(since 0.11) |
| oldest_color | (r,g,b) color triple to use for the color corresponding
to the oldest color, for the color scale used in blame or
the browser age column if color_scale is enabled.
(since 0.11) |
| oneliner_properties | Comma-separated list of version control properties to render
as oneliner wiki content in the repository browser.
(since 0.11) |
| render_unsafe_content | Whether raw files should be rendered in the browser, or only made
downloadable.
Pretty much any file may be interpreted as HTML by the browser,
which allows a malicious user to create a file containing cross-site
scripting attacks.
For open repositories where anyone can check-in a file, it is
recommended to leave this option disabled (which is the default). |
| wiki_properties | Comma-separated list of version control properties to render
as wiki content in the repository browser.
(since 0.11) |
[changeset]
| max_diff_bytes | Maximum total size in bytes of the modified files (their old size
plus their new size) for which the changeset view will attempt to show
the diffs inlined (since 0.10). |
| max_diff_files | Maximum number of modified files for which the changeset view will
attempt to show the diffs inlined (since 0.10). |
| wiki_format_messages | Whether wiki formatting should be applied to changeset messages.
If this option is disabled, changeset messages will be rendered as
pre-formatted text. |
[downloads]
| ext | List of file extensions allowed to upload. |
| path | Directory to store uploaded downloads. |
| title | Main navigation bar button title. |
| visible_fields | List of downloads table fields that should be visible to users on Downloads section. |
[google.analytics]
| admin_logging | Disabling this option will prevent all logged in admins from showing
up on your Google Analytics reports. |
| authenticated_logging | Disabling this option will prevent all authenticated users from
showing up on your Google Analytics reports. |
| extensions | Enter any extensions of files you would like to be tracked as a
download. For example to track all MP3s and PDFs enter:
mp3,pdf
Outbound link tracking must be enabled for downloads to be tracked. |
| google_external_path | This will be the path shown on Google Analytics
regarding external links. Consider the following link:
http://trac.edgewall.org/"
The above link will be shown as for example:
/external/trac.edgewall.org/
This way you will be able to track outgoing links.
Outbound link tracking must be enabled for external links to be
tracked. |
| outbound_link_tracking | Disabling this option will turn off the tracking of outbound links.
It's recommended not to disable this option unless you're a privacy
advocate (now why would you be using Google Analytics in the first
place?) or it's causing some kind of weird issue. |
| tracking_domain_name | If you're tracking multiple subdomains with the same Google Analytics
profile, like what's talked about in:
https://www.google.com/support/googleanalytics/bin/answer.py?answer=55524
enter your main domain here. For more info, please visit the previous
link. |
| uid | Google Analytics' UID.
The UID is needed for Google Analytics to log your website stats.
Your UID can be found by looking in the JavaScript? Google Analytics
gives you to put on your page. Look for your UID in between
var pageTracker = _gat._getTracker("UA-111111-11"); in the javascript.
In this example you would put UA-11111-1 in the UID box. |
[googlesitemap]
| change_frequency | Change frequency of URLs. Valid values: always, hourly, daily, weekly, monthly, yearly, never. Disabled if empty. |
| compress_sitemap | Send sitemap compressed. Useful for larger sitemaps. |
| compression_level | Compression level. Value range: 1 (low) to 9 (high). Default: 6 |
| ignore_users | Do not list wiki pages from this users (default: "trac") |
| ignore_wikis | List of wiki pages to not be included in sitemap |
| list_realms | Which realms should be listed. Supported are "wiki" and "ticket". |
| notify_on | Notify Google about a new sitemap on the listed actions. Valid values are: TICKET_CREATE, TICKET_DELETE, TICKET_MODIFY, WIKI_CREATE, WIKI_DELETE, WIKI_VERSION_DELETE, WIKI_MODIFY, WIKI_RENAME |
| sitemappath | Path of sitemap relative to Trac main URL (default: "sitemap.xml"). If this path ends in .gz the sidemap will automatically be compressed. |
| alt | Alternative text for the header logo. |
| height | Height of the header logo image in pixels. |
| link | URL to link to from header logo. |
| src | URL of the image to use as header logo. |
| width | Width of the header logo image in pixels. |
[inherit]
| plugins_dir | Path of the directory containing additional plugins.
Plugins in that directory are loaded in addition to those in the
directory of the environment plugins, with this one taking
precedence.
(since 0.11) |
| templates_dir | Path to the shared templates directory.
Templates in that directory are loaded in addition to those in the
environments templates directory, but the latter take precedence.
(since 0.11) |
[logging]
| log_file | If log_type is file, this should be a path to the log-file. |
| log_format | Custom logging format.
If nothing is set, the following will be used:
Trac[$(module)s] $(levelname)s: $(message)s
In addition to regular key names supported by the Python logger library
library (see http://docs.python.org/lib/node422.html), one could use:
- $(path)s the path for the current environment
- $(basename)s the last path component of the current environment
- $(project)s the project name
Note the usage of $(...)s instead of %(...)s as the latter form
would be interpreted by the ConfigParser? itself.
Example:
($(thread)d) Trac[$(basename)s:$(module)s] $(levelname)s: $(message)s
(since 0.10.5) |
| log_level | Level of verbosity in log.
Should be one of (CRITICAL, ERROR, WARN, INFO, DEBUG). |
| log_type | Logging facility to use.
Should be one of (none, file, stderr, syslog, winlog). |
[milestone]
| stats_provider | Name of the component implementing ITicketGroupStatsProvider,
which is used to collect statistics on groups of tickets for display
in the milestone views. |
[mimeviewer]
| enscript_modes | List of additional MIME types known by Enscript.
For each, a tuple mimetype:mode:quality has to be
specified, where mimetype is the MIME type,
mode is the corresponding Enscript mode to be used
for the conversion and quality is the quality ratio
associated to this conversion.
That can also be used to override the default
quality ratio used by the Enscript render, which is 2
(since 0.10). |
| enscript_path | Path to the Enscript executable. |
| max_preview_size | Maximum file size for HTML preview. (since 0.9). |
| mime_map | List of additional MIME types and keyword mappings.
Mappings are comma-separated, and for each MIME type,
there's a colon (":") separated list of associated keywords
or file extensions. (since 0.10). |
| php_path | Path to the PHP executable (since 0.9). |
| tab_width | Displayed tab width in file preview (since 0.9). |
[notification]
| admit_domains | Comma-separated list of domains that should be considered as
valid for email addresses (such as localdomain) |
| always_notify_owner | Always send notifications to the ticket owner (since 0.9). |
| always_notify_reporter | Always send notifications to any address in the reporter
field. |
| always_notify_updater | Always send notifications to the person who causes the ticket
property change. |
| ignore_domains | Comma-separated list of domains that should not be considered
part of email addresses (for usernames with Kerberos domains) |
| mime_encoding | Specifies the MIME encoding scheme for emails.
Valid options are 'base64' for Base64 encoding, 'qp' for
Quoted-Printable, and 'none' for no encoding. Note that the no encoding
means that non-ASCII characters in text are going to cause problems
with notifications (since 0.10). |
| smtp_always_bcc | Email address(es) to always send notifications to,
addresses do not appear publicly (Bcc:). (since 0.10). |
| smtp_always_cc | Email address(es) to always send notifications to,
addresses can be seen by all recipients (Cc:). |
| smtp_default_domain | Default host/domain to append to address that do not specify one |
| smtp_enabled | Enable SMTP (email) notification. |
| smtp_from | Sender address to use in notification emails. |
| smtp_from_name | Sender name to use in notification emails. |
| smtp_password | Password for SMTP server. (since 0.9). |
| smtp_port | SMTP server port to use for email notification. |
| smtp_replyto | Reply-To address to use in notification emails. |
| smtp_server | SMTP server hostname to use for email notifications. |
| smtp_subject_prefix | Text to prepend to subject line of notification emails.
If the setting is not defined, then the [$project_name] prefix.
If no prefix is desired, then specifying an empty option
will disable it.(since 0.10.1). |
| smtp_user | Username for SMTP server. (since 0.9). |
| ticket_subject_template | A Genshi text template snippet used to get the notification subject.
(since 0.11) |
| use_public_cc | Recipients can see email addresses of other CC'ed recipients.
If this option is disabled (the default), recipients are put on BCC
(since 0.10). |
| use_short_addr | Permit email address without a host/domain (i.e. username only)
The SMTP server should accept those addresses, and either append
a FQDN or use local delivery (since 0.10). |
| use_tls | Use SSL/TLS to send notifications (since 0.10). |
[project]
| admin | E-Mail address of the project's administrator. |
| descr | Short description of the project. |
| footer | Page footer text (right-aligned). |
| icon | URL of the icon of the project. |
| name | Name of the project. |
| url | URL of the main project web site, usually the website in which
the base_url resides. |
[query]
| default_anonymous_query | The default query for anonymous users. The query is either
in query language syntax, or a URL query
string starting with ? as used in query:
Trac links.
(since 0.11.2) |
| default_query | The default query for authenticated users. The query is either
in query language syntax, or a URL query
string starting with ? as used in query:
Trac links.
(since 0.11.2) |
| items_per_page | Number of tickets displayed per page in ticket queries,
by default (since 0.11) |
[report]
| items_per_page | Number of tickets displayed per page in ticket reports,
by default (since 0.11) |
| items_per_page_rss | Number of tickets displayed in the rss feeds for reports
(since 0.11) |
[revisionlog]
| default_log_limit | Default value for the limit argument in the TracRevisionLog
(since 0.11). |
[roadmap]
| stats_provider | Name of the component implementing ITicketGroupStatsProvider,
which is used to collect statistics on groups of tickets for display
in the roadmap views. |
[search]
| min_query_length | Minimum length of query string allowed when performing a search. |
[svn]
| branches | List of paths categorized as branches.
If a path ends with '*', then all the directory entries found
below that path will be included. |
| tags | List of paths categorized as tags.
If a path ends with '*', then all the directory entries found
below that path will be included. |
[theme]
| override_logo | Allow themes to override your header_logo. |
| theme | The theme to use to style this Trac. |
[ticket]
| default_cc | Default cc: list for newly created tickets. |
| default_component | Default component for newly created tickets. |
| default_description | Default description for newly created tickets. |
| default_keywords | Default keywords for newly created tickets. |
| default_milestone | Default milestone for newly created tickets. |
| default_owner | Default owner for newly created tickets. |
| default_priority | Default priority for newly created tickets. |
| default_resolution | Default resolution for resolving (closing) tickets
(since 0.11). |
| default_severity | Default severity for newly created tickets. |
| default_summary | Default summary (title) for newly created tickets. |
| default_type | Default type for newly created tickets (since 0.9). |
| default_version | Default version for newly created tickets. |
| max_comment_size | Don't accept tickets with a too big comment.
(since 0.11.2) |
| max_description_size | Don't accept tickets with a too big description.
(since 0.11). |
| preserve_newlines | Whether Wiki formatter should respect the new lines present
in the Wiki text.
If set to 'default', this is equivalent to 'yes' for new environments
but keeps the old behavior for upgraded environments (i.e. 'no').
(since 0.11). |
| restrict_owner | Make the owner field of tickets use a drop-down menu. See
Assign-to as Drop-Down List
(since 0.9). |
| workflow | Ordered list of workflow controllers to use for ticket actions
(since 0.11). |
[timeline]
| abbreviated_messages | Whether wiki-formatted event messages should be truncated or not.
This only affects the default rendering, and can be overriden by
specific event providers, see their own documentation.
(Since 0.11) |
| changeset_collapse_events | Whether consecutive changesets from the same author having
exactly the same message should be presented as one event.
That event will link to the range of changesets in the log view.
(since 0.11) |
| changeset_long_messages | Whether wiki-formatted changeset messages should be multiline or not.
If this option is not specified or is false and wiki_format_messages
is set to true, changeset messages will be single line only, losing
some formatting (bullet points, etc). |
| changeset_show_files | Number of files to show (-1 for unlimited, 0 to disable).
This can also be location, for showing the common prefix for the
changed files. (since 0.11). |
| default_daysback | Default number of days displayed in the Timeline, in days.
(since 0.9.) |
| max_daysback | Maximum number of days (-1 for unlimited) displayable in the
Timeline. (since 0.11) |
| newticket_formatter | Which formatter flavor (e.g. 'html' or 'oneliner') should be
used when presenting the description for new tickets.
If 'oneliner', the [timeline] abbreviated_messages option applies.
(since 0.11). |
| ticket_show_details | Enable the display of all ticket changes in the timeline
(since 0.9). |
[trac]
| authz_file | Path to Subversion
authorization (authz) file |
| authz_module_name | The module prefix used in the authz_file. |
| auto_reload | Automatically reload template files after modification. |
| base_url | Reference URL for the Trac deployment.
This is the base URL that will be used when producing documents that
will be used outside of the web browsing context, like for example
when inserting URLs pointing to Trac resources in notification
e-mails. |
| check_auth_ip | Whether the IP address of the user should be checked for
authentication (since 0.9). |
| database | Database connection
string for this
project |
| default_charset | Charset to be used when in doubt. |
| default_handler | Name of the component that handles requests to the base URL.
Options include TimelineModule, RoadmapModule, BrowserModule,
QueryModule, ReportModule and TicketModule (since 0.9). |
| default_timezone | The default timezone to use |
| htdocs_location | Base URL of the core static resources. |
| ignore_auth_case | Whether login names should be converted to lower case
(since 0.9). |
| mainnav | Order of the items to display in the mainnav navigation bar,
listed by IDs. See also TracNavigation. |
| metanav | Order of the items to display in the metanav navigation bar,
listed by IDs. See also TracNavigation. |
| permission_policies | List of components implementing IPermissionPolicy, in the order in
which they will be applied. These components manage fine-grained access
control to Trac resources.
Defaults to the DefaultPermissionPolicy? (pre-0.11 behavior) and
LegacyAttachmentPolicy? (map ATTACHMENT_* permissions to realm specific
ones) |
| permission_store | Name of the component implementing IPermissionStore, which is used
for managing user and group permissions. |
| repository_dir | Path to local repository. This can also be a relative path
(since 0.11). |
| repository_type | Repository connector type. (since 0.10) |
| request_filters | Ordered list of filters to apply to all requests
(since 0.10). |
| secure_cookies | Restrict cookies to HTTPS connections.
When true, set the secure flag on all cookies so that they are
only sent to the server on HTTPS connections. Use this if your Trac
instance is only accessible through HTTPS. (since 0.11.2) |
| show_email_addresses | Show email addresses instead of usernames. If false, we obfuscate
email addresses (since 0.11). |
| timeout | Timeout value for database connection, in seconds.
Use '0' to specify no timeout. (Since 0.11) |
| use_base_url_for_redirect | Optionally use [trac] base_url for redirects.
In some configurations, usually involving running Trac behind a HTTP
proxy, Trac can't automatically reconstruct the URL that is used to
access it. You may need to use this option to force Trac to use the
base_url setting also for redirects. This introduces the obvious
limitation that this environment will only be usable when accessible
from that URL, as redirects are frequently used. (since 0.10.5) |
[wiki]
| ignore_missing_pages | Enable/disable highlighting CamelCase links to missing pages
(since 0.9). |
| max_size | Maximum allowed wiki page size in bytes. (since 0.11.2) |
| render_unsafe_content | Enable/disable the use of unsafe HTML tags such as <script> or
<embed> with the HTML WikiProcessor
(since 0.10.4).
For public sites where anonymous users can edit the wiki it is
recommended to leave this option disabled (which is the default). |
| split_page_names | Enable/disable splitting the WikiPageNames with space characters
(since 0.10). |
[components]
(since 0.9)
This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.
The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.
Consider the following configuration snippet:
[components]
trac.ticket.report.ReportModule = disabled
webadmin.* = enabled
The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the webadmin package. Note that the trailing wildcard is required for module/package matching.
See the Plugins page on About Trac to get the list of active components (requires CONFIG_VIEW permissions.)
See also: TracPlugins
Note that prior to Trac r2335 (that applies to 0.9b1 and 0.9b2), you would use a [disabled_components] section instead. See a previous version of this page for the details.
See also: TracGuide, TracAdmin, TracEnvironment
