Version 10 (modified by ismael, 8 years ago)


ALOE OFDM Transmitter Demo

We describe in this page how to download the OFDM transmitter demo we presented at COST-Terra Summer School 2012.

Main Features:

  • Bandwidth 2-20 MHz
  • FFT size 128-2048 points
  • Turbo-encoding
  • Cyclic-Prefix
  • Run-time reconfiguration
  • E2E Latency: 4 ms (constant and non-random)
  • Distributed processing (tested with 2 processors and Gigabit Ethernet)
  • GUI: signal visualization, execution time monitoring, etc.

This version is unstable. Therefore, please don't hesitate to send your questions or comments to our Maillist.

Download and install

1) Prerequisites:

  • Linux operating (tested on Ubuntu)
  • Only the readline library is required to install ALOE. The FFTW library is required by the OFDM waveform. Both libraries should be installed before installing the ALOE OFDM Demo package.

If you want to use the USRP, make sure you have the UHD drivers is installed before installing ALOE.

2) Download the latest ALOE unstable version from

3) Untar, uncompress and cd into created directory

4) Configure, compile and install

sudo make install

5) Add the following lines to /etc/sysctl.conf file


and run

sudo sysctl -p 

6) Run the MAC-TEST to obtain your processor performance:

sudo runcf -t NOFCORES 1000000

replacing NOFCORES with the number of cores in your processor (the second parameter tells the MAC-TEST to run one million MAC operations). For example, in a quad-core, type

sudo runcf -t 4 1000000

and you may obtain something like this:

child 2: 1344192127:118	-> 1344192127:1561	diff: 0:1443	693 MMACS
child 3: 1344192127:117	-> 1344192127:1561	diff: 0:1444	692 MMACS
child 1: 1344192127:214	-> 1344192127:1597	diff: 0:1383	723 MMACS
child 0: 1344192127:214	-> 1344192127:1597	diff: 0:1383	723 MMACS
parent: 1344192126:183204->1344192127:3329 diff: 0:820125

Now edit the mops field in /usr/local/etc/platform.conf, choosing the minimum MMACS otained in the test, and adjst the nof_cores accordingly.

Running the Demo application

1) Run core framework from the downloaded directory (i.e. aloe-ctss-1.5.0/). Requires root privileges to set real-time scheduler

sudo runcf

2) In the command prompt, run

load ofdm128
init ofdm128
run ofdm128

to load, initialize and run the OFDM-128 application. Now you can check the waveform is running with the command

execinfo ofdm128

3) The OFDM bandwidth can be modified at run-time with:

statset ofdm128 source fftsize 256
statset ofdm128 source fftsize 512

Which set the fft size to 256 and 512 tones respectively (4 and 8 MHz bandwidth). By default, the framework will use one processor only from your computer. If you have a multi-core processor, edit the 'nof_cores' option in /usr/local/etc/platform.conf file. In our tests, the OFDM application runs perfectly in a 2.5 GHz Intel processor using one core only. The 512 mode produces frequent real-time faults (printed stdout). This mode works correctly in a dual-processor environment.


If the UHD driver is installed before running ALOE's configure script, the OFDM waveform will send the samples to the USRP. In the configuration file /usr/local/etc/platform.conf (need root privileges) you'll see something like this:

## DAC SELECT. Use dac_tx/dac_rx modules to send/recv samples to dac's.
# Available dacs:
#       x5-400: use the pci-e x5-400 daughterboard from innovation logic
#       soundcard: use jack libraries to access soundcard's dac
#       udh: use Universal Hardware Driver to access USRP
#       none: disable dac   

dac {
        #Select dac configuration file. Read dac's documentation.

Just change the field name=none by


Now you need to choose the transmit center frequency, which depends on your device. Edit the file /usr/local/etc/usrp.conf and look for the section

tx {

Only the freq and gain options needs to be configured. The rest of the parameters define the initial working mode. The OFDM application, however, modifies the sampling frequency and blocksize at runtime, depending on the transmission mode. Now run again the core framework (sudo runcf command) and from the command prompt, load, init and run the OFDM application as described in the previous section.

Try again to change the fftsize and you should observe in an spectrum analyser that the transmitter is using more or less bandwidth.

Distributed Processing

In a distributed environment, one of the processors acts as the MASTER. The MASTER node runs the so called Manager Daemons. The aloe-ctss package already provides the configuration for running the demo with two computers connected by an Ethernet.

1) Download and install ALOE in two computers

2) Setup your network, making sure you have full TCP and UDP connectivity between both computers.

3) In the SLAVE node, edit file /usr/local/etc/xitf1.conf and replace by the ip address of your MASTER node.

4) In the MASTER node, run the core framework

sudo runcf

5) In the SLAVE node, run the core framework indicating that the configuration file is platform1.conf:

sudo runcf -c hw_api/lnx/cfg/platform1.conf

6) In the MASTER node, you should see messages indicating that the new processor has been detected.

7) In the MASTER node, enter the load/init/run command sequence to begin start the waveform. Use

execinfo ofdm128

command to check whether the waveform modules have been mapped to the two processors or not. If the waveform only uses one processor, try loading the ofdm512 application (which requires more computing resources).