/* Example use of Reed-Solomon library
*
* Copyright Henry Minsky (hqm@alum.mit.edu) 1991-2009
*
* This software library is licensed under terms of the GNU GENERAL
* PUBLIC LICENSE
*
* RSCODE is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* RSCODE is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Rscode. If not, see .
* Commercial licensing is available under a separate license, please
* contact author for details.
*
* This same code demonstrates the use of the encodier and
* decoder/error-correction routines.
*
* We are assuming we have at least four bytes of parity (NPAR >= 4).
*
* This gives us the ability to correct up to two errors, or
* four erasures.
*
* In general, with E errors, and K erasures, you will need
* 2E + K bytes of parity to be able to correct the codeword
* back to recover the original message data.
*
* You could say that each error 'consumes' two bytes of the parity,
* whereas each erasure 'consumes' one byte.
*
* Thus, as demonstrated below, we can inject one error (location unknown)
* and two erasures (with their locations specified) and the
* error-correction routine will be able to correct the codeword
* back to the original message.
* */
#include
#include
//#include "ecc.h"
#include "rsol_code.h"
#define ML (K_LENGTH + NPAR)
unsigned char msg0[K_LENGTH] = {0xD4, 0xBA, 0xA1, 0x12, 0xF2, 0x74, 0x96,\
0x30, 0x27, 0xD4, 0x88, 0x9C, 0x96, 0xE3,\
0xA9, 0x52, 0xB3, 0x15, 0xAB, 0xFD, 0x92,\
0x53, 0x07, 0x32, 0xC0, 0x62, 0x48, 0xF0,\
0x19, 0x22, 0xE0, 0x91, 0x62, 0x1A, 0xC1};
unsigned char msg1[N_LENGTH];
unsigned char codeword[N_LENGTH], decodedword[N_LENGTH];
/* Some debugging routines to introduce errors or erasures
into a codeword.
*/
/* Introduce a byte error at LOC */
void
byte_err (int err, int loc, unsigned char *dst)
{
printf("Adding Error at loc %d, data %#x\n", loc, dst[loc-1]);
dst[loc-1] ^= err;
}
/* Pass in location of error (first byte position is
labeled starting at 1, not 0), and the codeword.
*/
void
byte_erasure (int loc, unsigned char dst[], int cwsize, int erasures[])
{
printf("Erasure at loc %d, data %#x\n", loc, dst[loc-1]);
dst[loc-1] = 0;
}
void fill_prefix(unsigned char msgori[], int data_size, unsigned char msgdst[])
{
int i;
unsigned char msg1[N_LENGTH];
/*FILL PREFIX WITH 0x00*/
for(i=0; i<(K_LENGTH-data_size); i++)msg1[i]=0x00;
for(i=0; i